Eiki MCD-100, Руководство пользователя

Страница: 30 / 96

30
6. Wired LAN Configuration
Preparation
1. Insert the wired LAN card : CA-20 into the MCI.
2. Insert the LAN cable into the wired LAN card.
※ Confirm the functions of indicators on the MCI and the wireless LAN card.
Setting of the Network Environment
Wireless LAN environment will be set on the Projector Menu.
Detailed setting is available with the browser menu. Refer to "8. Configuration with Browser".
Configuration
1. Select "Wired" from the input menu of the projector.
If "Wired" is not shown on the menu, the wired LAN card may not be properly mounted to
the projector. Check the attachment once again
Caution: Confirm if the Power Indicator on the MCI is lit and the Error Indicator is off.
If the Power Indicator is off and the Error indicator is flashing, check the attachment of the MCI
and restart the projector.
MCI
MCD-100
Wired LAN Card
CA-20
LAN Cable
q
q LNK......Normally lit
w
ACT
....Flashes when
receiving / transmitting
data.
w
Wired LAN Card
Power Indicator
Status Indicator
Error Indicator
MCI
MCI has to be installed on the same LAN environment with the MCI Client Computer for its
operation.