Eighteeth UltraMint, Руководство пользователя

Страница: 17 / 35

5 Product function and use
Page 17 / 35
5.3 Operating the device
5.3.1 Install the device correctly
according to the installation steps.
The operator is facing the device, and
the water control knob on the
handpiece cord is adjusted to the
maximum.
5.3.2 Press the power switch on the
main unit. At this time, the scaling
mode indicator is lit, the power
display window shows 05, the power
indicator lights half.
5.3.3 Select the appropriate working
tip as required, and tighten it to the
handpiece by using the provided
wrench.
5.3.4 Hold the handpiece according to
the using habits, generally adopt the
pen holding position.
5.3.5 When the device is working
normally, the frequency is extremely
fast. When scaling, ensure that the tip
vibrates normally and the water is
atomized normally, then gently touch
the tooth surface and reciprocate at a
certain speed to remove the dental
calculus. Keep the water flow
smoothly to avoid tip overheat. Never
use excessive force or stay for too
long when cleaning the teeth.
5.3.6 Power adjustment: Adjust the
power depending on the application.
Generally, the medium power is
enough, and the output power can be
adjusted at any time in clinical
practice according to the
sensitivity of the patient's teeth and
the hardness of calculus.
5.3.7 Water flow adjustment: Step on
the foot pedal to activate the tip
vibration. Turn the water control knob
on the handpiece cord to form water
spray to cool the tip and the cleaned
tooth surface.
5.3.8 During clinical use, the cusp of
the tip should not be in vertical contact
with the tooth surface, and heavy
pressure should not be applied in
order to avoid damage to the tooth
and the tip.
5.3.9 After the operation is completed,
adjust the water flow of the handpiece
to the maximum, let the device work
for about 30 seconds to rinse the
handpiece and the tip, and then
remove the handpiece and the tip for
cleaning, disinfection and sterilization.