Eighteeth UltraMint, Руководство пользователя

Страница: 10 / 35

4 Installation
Page 10 / 35
4.3 Installation steps
4.3.1 Install the handpiece
support
Install the handpiece support to the
main unit first.
Clamp the handpiece cord to the
hanpiece support.
4.3.2 Install power adapter and
foot pedal
Power switch
Foot pedal socket
Power adapter socket
As shown in the figure, plug the power
adapter and foot pedal into the
corresponding sockets. Turn the
power switch to the off state (press
the side marked "O" on the switch),
and insert the adapter power plug into
the power supply to supply power to
the main unit.
WARNING
¾ The power adapter must be
plugged into the main unit before
being plugged into the power
supply.
4.3.3 Install external water
supply hose
Install the external water supply hose
to the external water hose connector
on the main unit as shown below.
External water
hose connector
1) Unscrew the lock nut on the
external water hose connector
counterclockwise.
2) Put the lock nut on the external
water supply hose.
3) Insert the external water supply
hose to the external water hose
connector.
4) Tighten the lock nut clockwise to
complete the installation of the
external water supply hose.
5) Connect the other end of the
external water supply hose to the
clean water source.
6) See the next page for installation
diagram.