2. IMPORTANT INFORMATION
Do not paint your Alarm. Do not allow paint, water or dust
to contaminate your Alarm.
Your Alarm is a mains 230V AC electrical appliance. Do not
open or insert anything into the Alarm.
Regularly check that the green mains indicator light on the
cover is on.
If the Alarm beeps and the yellow light flashes at the same
time the battery is depleted – ensure green mains power
light is on.
N.B. If the cause of an alarm is uncertain then it should be
deemed to be an actual fire and the dwelling should be
evacuated immediately.
Test monthly - press and hold the Test/Hush button on the
Alarm for 10 seconds. The Alarm will sound loudly and the
red light on the cover should flash rapidly. All the other
interconnected Alarms should sound.
If a nuisance alarm occurs, press the Test/Hush button to
silence the Alarm for 10 minutes.
Clean your Alarm regularly. This will reduce the risk of
false alarms.
Remove or completely cover your Alarm when decorating
to prevent dust or other contamination damaging the Alarm.
If your Alarm sounds for no reason and will not reset, it can
be removed by releasing the clip on the base.
(see "
ALARM REMOVAL
" in the
INSTALLER
section).
5
