The interconnect wire (minimum 0.75mm
2
cable) must be treated as if it was Live. It
should be insulated and sheathed.
A maximum of 250 metres of wire can be used (maximum resistance between
detectors 50 Ohms).
Alarms should be interconnected only within the confines of a single family living unit.
If they are connected between different units there may be excessive nuisance alarms.
Everybody may not be aware that they are being tested or that it is a nuisance alarm
caused by cooking etc.
Ensure the Alarms operate correctly - see “
TESTING & MAINTAINING YOUR
ALARM
” section.
20
Aico Ltd
. Mile End Business Park,
Maesbury Rd, Oswestry, Shropshire SY10 8NN, U.K.
Tel: 01691 664100
www.aico.co.uk
Ei Electronics.
Shannon, Co Clare, Ireland.
Tel:+353 (0)61 471277
www.eielectronics.com
© Ei Electronics 2015
