No.
Parameter
Function Parameter
1 = On
P 7
Protocol telebox
0 = Telebox classic
1 = data set scale looped through
P 8
4-20 mA Minimum value (4 mA)
e.g. 4 mA at 0 kg
P 9
4-20 mA Maximum value (20 mA)
e.g. 20 mA at 5000 kg
P 10
Relay outputs 0= separated 1=parallel (relay output 1)
P 11
1= 1 weighing system / 2= 2 weighing systems
P 12
Frequency channel scale 2
P 13
Scale number Scale 2
P 14
Signaling radio connection to scale 0= off 1...4 Signaling time in seconds
P 15
Transparency Mode 0=Off 1=On
P 16
Error reset automatically
P 17
0= without function
1= PAT: Print, Add Total digital Out 3 = 2 seconds High
P 18
Handheld transmitter numbers Telebox SPS remote control
P 20
Calibratable memory (flash card)
0 = not present
1 = present
P 21
View stored value on flash card
P 22
Memory Send again via RS 232 interface
P 30
Key acknowledgement (beeper)
0 = Off // 1 = On
P31
0= Clock in standby off
1= Clock in standby on
P32
0= Clock in normal operation off
1= Clock is displayed after 15 minutes of standstill
P 33
Function of the relays:
Setting low or high active
Setting positive, negative or sign independent.
For setting see section Relay settings.
P 90
Load factory settings
P 91
Restore last configuration (only if the configuration was not saved)
P 92
Load custom data from flash
P 99
Save configuration
Activate parameter with OK, confirm 0 with OK.
The telebox restarts automatically
