EGi Millennium, Техническое руководство

Страница: 66 / 84

66
Installation start up
Millenium installation password
(Continuing from
the message
OPTIONS MENU:)
ZONES TIME REPEAT
INTERVAL
MORE
VOLUME
PRIVATE EVENT
The symbol «>» on the right
shows that the first target zone
/ group (from a total of 4) is
being selected. Using the keys
«+» and « – » on the left we
can see the available
zones/groups appearing in the
target line. When the desired
group/zone is displayed in the
target line, we press the second
key from the key set on the right
to select the second zone/group.
If we select " YES " the message
will be broadcast at the selected
time.
If we select " NO " the activation
time will have no effect.
Use " HOUR " and " MINUTE " to
define the activation time.
Use « + » and « – » to decide
how many times should the
message be repeated.
With « + » and « – » we select
the minutes of interval between
the message repetitions.
With « + » and « – » we select
the volume level of the
message broadcast
We can decide to override the
private mode of the selected zone
/ group or not.
SETUP
MORE
PASSWORD
SETUP
T-PHONE
PASSWORD
We must enter the password and
press YES .
To remove the password we must
press NO .
Enter the password and press YES .
SETUP
BELL SETUP
T-PHONE
ASSIGN
We can select the T ONE type.
Pressing ZONE we will change to
GROUP .
Using « 000+ » and « – », we can
select the zone or group number.
Using « +0000 » and « – », we can
select the number assigned to that
zone or group.
Once the number is selected, we
must press ASSIGN .
Bell tone
Reception Tone 1
Management Tone 2
Phone operator Tone 3
General password of the MILLENNIUM Password of the telephone PA system
1234 5678
(Continuing from
the message
OPTIONS MENU:)
(Continuing from
the message
OPTIONS MENU:)
Enabling general access password
and telephone PA password
Message Target zone / group Activation time Repeats Interval Volume Private Event
Closing time General 19:45 5 3’ 75 No
Welcome Lobby 0 0’ 65 No Presence Detector
Promotion Coffee Shop 09:00 12 10’ 70 No
SETUP
MESSAGE
MSG. 1
MESSAGE OPTIONS MENU
time
private
msg. 1
zones
event
repeat
more
If we select « >- - - - » no event
is assigned to the message.
When we select an event, that
event will activate the message
(only one event can be selected
for each message).
+ z./g. >
group x
msg. 1
number
msg. 1
of repeats
000 +
interval
yes
hour +
msg. 1
no
interval
msg. 1
minutes
10 +
volume
monitor
msg. 1
record
erase
volume msg. 1
000 +
+ z./g.
msg. 1 <
overrige
msg. 1
private
yes
> no
msg. 1
event 1
event 2
event 3
Telephone PA password
0
4
5
password yes
1
no
2
3 0
4
5
password yes
1
no
2
3
Assigning a telephone number
to a zone or group
Selecting chime tones
software version
start up
password
msg. cut in
assign
password
000 +
seconds
msg. cut in
assign
password
000 +
seconds
number
assign
zone
+ 0000
tone 1
tone 6
tone 4
tone 2
tone 3
tone 5
000 +
Public address automatic message scheduling
Example of key sequence to press
Selecting a target
zone/group
Selecting a message
Selecting an activation
time
Setting repeats
Setting message
volume
Setting private mode Activating a message
by an event
(Continuing from
the message
OPTIONS MENU:)
(Continuing from
the message
OPTIONS MENU:)
(Continuing from
the message
OPTIONS MENU:)