EGi Millennium, Техническое руководство

Страница: 43 / 84

1202 Control console
Control console 1202. Operation of the pre-recorded message player
If the general access password is active the system will require us to introduce
it every time we try to operate this module (see point 2 of “access restrictions”).
1202
5 Replay of a message
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded
message player ( 1103 ) in the system but NOT
a module for sending messages over the
telephone ( 1104 ):
MESSAGE
MSG. 5
REPEAT
Provided that message number 5 is
already recorded:
+ + +
INTERVAL
+
+ programs message 5 to
be played 2 times, with an interval of 1
minute between 2 repeats.
6 Changing the volume level of a
message
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded
message player ( 1103 ) in the system but NOT
a module for sending messages over the
telephone ( 1104 ):
MESSAGE MSG. 6
MORE VOLUME
+ or – modifies the volume level of the
message. If reduced to 0 , the message will be
played in each target zone at the volume level
that is set for paging there.
7 Monitoring a message
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access password is
NOT active, and there is a pre-recorded
message player ( 1103 ) in the system but NOT
a module for sending messages over the
telephone ( 1104 ):
MESSAGE
MSG. 7 MORE
MONITOR
plays the message number 7 (if
previously recorded) by the built-in speaker at the
control console 1202 . If the paging line is busy
because another message is being broadcast or
a pre-recorded message is being played or saved
from another console 1202 , instead of playing
the message the following message will appear:
Control console 1202. Operation of the pre-recorded message player
1202
If the general access password is active the system will require us to introduce
it every time we try to operate this module (see point 2 of “access restrictions”).
8 Recording a message
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access
password is NOT active, and there is a
pre-recorded message player ( 1103 )
in the system but NOT a module for
sending messages over the telephone
( 1104 ):
MESSAGE
MSG. 8
MORE
RECORD
EXT MIC (And then the sign “>”
appears next to EXT MIC)
Starts recording the message from the
gooseneck microphone in the control console
or from an external microphone connected to
the RCA socket in the pre-recorded message
player, depending on where the symbol “>” is.
As long as we keep the key
pressed a
countdown -starting from 15- will let us know
the time remaining to finish up the record. The
message record will finish when the countdown
reaches 0 or when we release the button
,
whatever comes first.
If the paging line is busy because another
message is being broadcast or a pre-recorded
message is being played or saved from another
console 1202, instead of starting the record the
following message will appear:
9 Erasing a message
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access
password is NOT active, and there is a
pre-recorded message player ( 1103 )
in the system but NOT a module for
sending messages over the telephone
( 1104 ):
MESSAGE MSG. 1
MORE ERASE
YES erases message number 1.
10 Time setting
If three groups -for instance- have been
previously created:
SETUP
Provided that the general access
password is NOT active, and there is a
pre-recorded message player ( 1103 )
in the system but NOT a module for
sending messages over the telephone
( 1104 ):
TIME
+ or – modifies the hour.
+ or – modifies the minute.
adjusts the time of the system.
43