EGi Millennium, Техническое руководство

Страница: 5 / 84

1301.x
1
1 2
3
ON
1301
o
4
1
2
3
4
4 W 16 W
20 W
10 W
4
-
2
32 W
8 + 8
1
2 + 2
8
4
16 + 16
10 W +
10 W
ON
1301
o
1301
ON
1301
o
1301.1
ON
1301
o
10 W
20 W
10 W
20 W
10 W
10 W
–
+
–
+
–
+
10 W
10 W
–
+
3 2 1
1 1
L R
1 1 2 2
L R L R
2 1 4 IN 9 5 IN IN IN
PIN
2 1
Only 1301
PIN
5
230 V~
230 V~
6 5 1 2 4 1 2
Audio Processor
1301.x Audio processor 2 + 1 zones
• Procesador de audio de 3 zonas para instalaciones de sonido comerciales.
• It includes a 10 + 10 W (20 W) amplifier for zone 1 and another of 10 W for zone 2, in addition of a 15 V line
output for the connection of control units.
• The 15 V line is expandable.
• Messages with pre-warning tone and door bell in the 3 zones.
• Dual 12 Vdc , 1 A output for operation of external systems.
• White housing.
• FM radio tuner (only in 1301.1 )
This processor allows you to provide sound for facilities with 2 centralised zones plus 1 de-centralised zone (general line),
being these “zones” understood as the different areas which must be considered for message broadcast. Version 1301.1
incorporates a FM tuner and a dual RCA input for external musical sources.
NUMBER OF SPEAKERS PER LINE
Schematics
ON/OFF switch for the installation
Input for 1201 module
Phone type input RJ45 for the connection of the
1201 control console. There is also the possibility
of connecting it internally.
Antenna input
Coaxial input for FM antenna. It enables the
connection of a FM antenna to improve the
reception of radio stations.
Input for external music source
RCA input for external music sources. It enables
the connection of an external, music source
(CD, cassette player, etc ).
ZONE 2 speakers output
ZONE 1 speakers output
Only in 1301.1
AntennaGround Terminals for external music source
Terminals for external
music sources
Ground
Connection to 1501
module
Audio input
to drive messages
to the control console
Output 2 for operation of external systems (Relay output 12 V a.c.; 1 A)
In the external music source is
connected using the 1501
connection base, this input
should remain unused.
230 V ~
100 W full power
15 V for power supply through general line
TECHNICAL
SPECIFICATIONS
Power supply
Consumption
Voltage output
1301 • 1301.1 with FM radio
20 W; min line impedance 4 W
or 10 + 10 W; min line impedance 2 W
10 W; min line impedance 8 W
Zone 1 power
Zone 2 power
Up to 1 A nominal current (máx. 1,5 A)
External input 75 W (only 1301.1)
17 dB ( m V)
General line
Antenna
Radio sensitivity
Zone 1
Zone 2
You can use whether the double
10 W output or the 20 W output,
but never both simultaneously .
Door bell
Audio program 1
Audio program 2 (FM radio in 1301.1 )
Messages zone 3
15 V output
Override input for zone 2; 10 W
Override input for zone 1; 20 W
Ground
Output 1 for operation of external systems (Relay output 12 V a.c.; 1 A)