EGi Millennium, Техническое руководство

Страница: 65 / 84

Installation start up
Zone name Zone Nr. Assigned to group Max. volume level Max. PA vol. level Private Speaker type
Mr. Low 1 Sales 60 80 No 5" (M BAS 1)
Smith 2 Sales 60 80 No 5" (M BAS 1)
Clarke 3 Mkting 50 70 No 5" (M BAS 1
Cohen 4 Mkting 55 65 No 5" (M BAS 1)
Stores 5 —- (Direct) 70 80 Yes Horn sp. (LOW BAS)
Garden 6 Common 60 70 No Horn sp. (LOW BAS)
Bckyard 7 Common 60 70 No Horn sp. (LOW BAS)
Corridr 8 Common 60 70 No Horn sp. (LOW BAS)
QA Lab 9 —- (Direct) 60 70 Yes 2" (M BAS 2)
Rcption 10 —- (Direct) 40 50 No 8" (NORMAL)
Zone and group assignment and parameter adjustment
65
Example of key sequence to press
Assigning zone numbers Assigning zone names Creating and labelling groups Setting the speaker type Setting private mode Setting maxi. volume level
YES
ZONE SET
ZONES
All the SETUP lamps in the modules blink.
Go through the rooms according to the zone
assignment order.
When the SETUP button is pressed, the lamp
stops blinking and remains on, indicating
that the zone number for that device has
been selected.
REPEAT THE PROCEDURE IN ALL THE ZONES
TO BE ASSIGNED.
Then, return to the control console and press
HERE to assign its zone number to it.
Number of zones that have
already been assigned
MORE
START UP
The SETUP lamps turn off.
SETUP
+ (DISPLAY SHOWS 001)
1...
...n
here
zone set
here
zone set
001 +
GENERAL <
Group 01 has been created. We
must select it to label it with a
name.
By pressing “ ZONES ” we set
the zones that will form the group.
By pressing “ NAME ” we assign
a name to the group.
GENERAL <
ZONE
PRIVATE
ZONE 3 <
ZONE
ZONE 3 <
Use Keys “ + ” And “ – “ To
Adjust The Volume Level
GENERAL <
ZONE
AMP. 001 <
MORE
GENERAL <
no
create new
group
NAME
max.VOL
30 +
Setting PA volume level
GENERAL <
ZONE
ZON 001 <
NAME
A name must be assigned.
And so for each zone that we have
in the system.
NEW
yes
GENERAL <
ZONE <
AMP. 001 <
We Select “MORE”.
SPEAKER
AMP.001
MORE
SPEAKER
MAX.VOL
000 +
gr 01
more
general
zone
zon 001
name change
gr 01
zones
erase
new
name
change
erase
new
gr 01
zones
gr 01
speaker
max.vol
080 +
amp.001
zone 3
PRIVATE
PRIVATE MODE
ZONE 3
ENABLE
DISABLE
TYPE OF SPEAKER
LOWBAS
ZONE
TURN ON
NORMAL <
MBAS 1
MBAS 2
SYMPTOM
Control console shows “Error 001”.
Control console shows “Error 002”.
Control console shows “Error 003”.
Control console shows “Error 004”.
Control console shows “Error 005”.
Control console shows “Error 006”.
Control console shows “Error 007”.
Control console shows “Error 008”.
POSSIBLE REASON
The communication between the control console and the selected module fails (no matter
if the module is placed inside or outside the audio processor).
Failure in the communication between the control console and the audio processor or
one of its audio modules (programs 1 to 4).
Failure in the digital communication with the pre-recorded message player 1103.
Failure in the digital communication with the module for telephone messages 1104.
Sporadic failure in the digital communication.
1302 Hardware error.
1302 Hardware error.
1302 Hardware error.
SOLUTION
Check the connection of wires “9” and “90” to the module (amplifier or control unit)
of that zone.
Check the connection of wires “9” and “90” in the audio processor.
Check the connection of module 1103 in the audio processor.
Check the connection of module 1104 in the audio processor.
If not permanent, maintenance is ot necessary.
Replace the 1302 by a new one.
Replace the 1302 by a new one.
Replace the 1302 by a new one.
TROUBLESHOOTING