Efka SM210A5710, Инструкция по эксплуатации

Страница: 44 / 48

EFKA SM210A5710 44
8.3 Supplier Level
Parameter Designation Unit max min Preset Ind.
Prg.
No.
200 GE Number of increments per revolution of the incr. 1200 60 120 A
external speed encoder e.g. main drive
AB62CV
= 120
AB220A = 512
201 PGm Origin of the position transmitter signals 9 0 6 A
0...5 = No function
6
= Signals G1/G2 are provided by the AB62CV
d.c. drive by way of sockets B18/1 and 6.
Parameter 200 must be set at 120.
7 = Signal G1 is p rovided by an external control.
For intermittent operation the stepping motor is
activated outsiede of the range of position 2.
8 = Function as with setting 7, but the stepping
motor is activated within the range of position 2.
9 = Positions are generated only with G1 and a
synchronous signal on B18/9. Parameter 200
must contain the incr./rev. value of the G1 encoder.
Positions are generated only if a machine running
signal is emitted from input in5.
202 ic Number of full steps per rotation of the stepping motor 480 60 200 A
203 Efi Speed operational mode if parameter 290 = 0 1 0 0 A
0 = Synchronous speed
1 = Fixed speed
207 ich On-load current at stepping motor standstill mA 3000 0 100 A
208 ir On-load current when the stepping motor is mA 3000 100 1000 A
running
220 d01 Percental adaptation of the stepping motor % 200 0 100 A
speed from 700 RPM onwards
221 d02 Percental adaptation of the stepping motor % 200 0 100 A
speed from 1400 RPM onwards
222 d03 Percental adaptation of the stepping motor % 200 0 100 A
speed from 2100 RPM onwards
223 d04 Percental adaptation of the stepping motor % 200 0 100 A
speed from 2800 RPM onwards
224 d05 Percental adaptation of the stepping motor % 200 0 100 A
speed from 3500 RPM onwards
225 d06 Percental adaptation of the stepping motor % 200 0 100 A
speed from 4200 RPM onwards
226 d07 Percental adaptation of the stepping motor % 200 0 100 A
speed from 4900 RPM onwards
227 d08 Percental adaptation of the stepping motor % 200 0 100 A
speed from 5600 RPM onwards
228 d09 Percental adaptation of the stepping motor % 200 0 100 A
speed from 6300 RPM onwards
229 d10 Percental adaptation of the stepping motor % 200 0 100 A
speed from 7000 RPM onwards
230 c7 Correction factor when switching to fast tape feeding 9999 0 25 A
231 c8 Correction factor when switching to fast slow feeding 9999 0 90 A