Efka SM210A5710, Инструкция по эксплуатации

Страница: 25 / 48

EFKA SM210A5710 25
7.3.2 Timing Diagram “Expander Feeding/Synchronous Stepping Motor Operation“ (Pa.290=3)
Abbreviations for d.c. drive:
POS1 = Position 1 on the sewing machine
POS2 = Position 2 on the sewing machine
FL = Sewing foot lift
Abbreviations for stepping motor:
SM>> = Direction of rotation of stepping motor: cw (speed synchronous with d.c. drive)
SM<< = Direction of rotation of stepping motor: ccw (speed synchronous with d.c. drive)
in1 = Pushbutton for tape cutter
in2 = Input for reset (FF)
in6 = Pushbutton for expander feeding M7 (SML) = Signal “stepping motor running”
M2 (FF) = Signal “flip-flop” M8 (BM) = Tape cutter
M3 (BL) = Signal “blowing” M9 (DR) = Signal “direction of rotation”
Parameter setting of stepping motor control for above timing diagram:
Sign Function Parameter
Mode of operation “expander feeding“ 290 = 3
Expander feeding by means of number of steps c3 131 = 0
*9 Synchronous operation according to d.c. drive speed. The transmision ratios are selected by means of
pushbuttons 1...3 on V810 and pushbuttons 1...9 on V820.
*10 Signal “direction of rotation” remains On until the direction of rotation is reversed.
POS.1
ST2/ 2 0
DC
-
+ - 1
n
- 2
0
1/2
1
n2 n1 n2 n7
POS.2
ST2/ 3 5
FL
ST2/ 2 1
t3 t x
0262/MODE-3c
ST1/ 2 8
ST1/ 2 4
M9 (DR)
ST1/ 2 5
SM
ST1/ 2 3
M8
M3
M7
ST1/ 2 7
(SML)
(BM)
(BL)
ST1/ 1 1
SM
ST1/ 1 2
in6
M2 (FF)
in2
SM
SM
ST1/ 7
in1
9
SM
10
0262/MODE-3d