Efka SM210A5710, Инструкция по эксплуатации

Страница: 43 / 48

EFKA SM210A5710 43
TECHNICIAN LEVEL
Parameter Designation Unit max min Preset Ind.
Prg.
No.
180 itm 0 = No intermittent operation 2 0 0 A
1 = Intermittent operation as shown in diagram
(from window 2E onwards) chapter 7.6.2.
2 = Intermittent operation as shown in diagram
(from window 2E...2A) chapter 7.6.2.
In some operational sequences intermittent stepping
motor operation is not possible, particularly if parallel
operation of the d.c. motor cannot be ensured. In those
cases intermittent operation is automatically suppressed.
181 c10 If in different modes the ratios are displayed for 999 0 3 A
selection by means of the pushbuttons on the control
panel, the stepping motor impulses of parameter 181
are used for intermittent operation.
182 c11 Setting the stepping motor impulses during feeding 999 0 0 A
for intermittent operation, if parameter 180 = 1.
The value of parameter 181 must be subtracted from
the value selected on the control panel. This procedure
is applied in the lockstitch mode during the backtacking
backward section.
190 mbS 0 = The values of the ratios or steps are selected 1 0 0 A
via inputs in3 and in4. The maximum limit of the
selected values is determined by pressing the
respective pushbuttons on the control panel.
1 = Inputs in3 and in4 are disabled. Ratios or steps
are selected directly by pressing the respective
pushbuttons on the control panel.