EFI Fiery ES IC-418, Конфигурация и настройка, Страница: 82 / 243

14
Click
OK
to close the
Configure Standard TCP/IP Port Monitor
dialog box.
Note:
The Fiery ES supports printing in the IPv6 environment on Windows operating systems. For information
about supported operating systems, see Configuration and Setup .
15 Click
Apply
in the Fiery ES
Properties
dialog box, and then click
OK
.
Complete IPP connections on Windows client computers
With Internet Printing Protocol (IPP), print jobs are sent to the Fiery ES over the Internet from Windows
computers.
Before you begin, perform the following tasks:
•
Make sure that the Fiery ES is configured for TCP/IP printing and IPP printing. (See Command WorkStation
Help .)
•
Specify the printing destination on your computer.
IPP over SSL connections is supported.
Note:
Using IPP over SSL connection requires certificates on Windows operating systems. For information about
supported operating systems and on certificate creation, see Configuration and Setup . You can manage certificates
from Configure. (See Command WorkStation Help .)
1
Navigate to the devices and printers on your network.
The printers are displayed in the
Devices and Printers
(or
Printers and Faxes
or
Printers
) folder.
2
To add a printer, do one of the following:
•
Click
Add a printer
, and then select
Add a network, wireless, or Bluetooth printer
or
Add a network printer
.
•
Double-click the
Add Printer
icon, click
Next
, and then select
Network printer
and click
Next
.
3
To search for a printer on the network, do one of the following:
•
Windows 10/Server 2016: If the printer search takes a long time, click
The printer that I want isn’t listed
.
•
Windows 8.1/Server 2012 R2: If the printer search takes a long time, click
Stop
, and then click
The printer that I
want isn’t listed
.
•
Windows 7/Server 2008 R2: If the printer search takes a long time, click
Stop
, and then click
The printer that I
want isn’t listed
.
Printing
Windows for Fiery ES
22