EFI Fiery ES IC-418 Скачать руководство пользователя страница 34

Страница: 34 / 243

Select the backup reference file and the backup data file and click

Follow the on-screen instructions to restore your settings and click

Finish

Reset the configuration settings to factory defaults from the printer control panel

Important:

If you reset the configuration settings to factory defaults, all the customized configuration settings

on the Fiery ES are lost. Before you reset the Fiery ES to factory defaults, we recommend that you discuss the

issue with technical support.

Note:

You can reset the configuration settings to factory defaults from the printer control panel or in Configure

through

Fiery Server

Restore Default Fiery Settings

. This procedure describes the printer control panel method (the

Configure command is described in Configure Help). With either method, we recommend that you review all the

configuration settings after the reset and customize as required for your print environment.

Print out the configuration page or otherwise record the customized configuration settings. This can be used as a

reference if you want to reenter specific settings after returning the configuration to factory defaults.

Review the configuration settings and customize as required, then reboot to apply the changes.

Clearing print jobs

The

Clear Server

command allows you to clear all queued print jobs from the Fiery ES Print, Hold, and Printed

queues. Jobs can also be deleted, individually or as a group, using Command WorkStation.

Clear Server

also clears all

jobs archived on the Fiery ES hard disk drive, the index of archived jobs, and all FreeForm masters.
Back up your original data on your own media at the same time you store and save data on the Fiery ES hard disk

drive. Never damage or reset the Fiery ES hard disk drive, and do not turn off the system while accessing the hard

disk drive.
If the Fiery ES hard disk drive or system software experiences technical difficulties, data stored and saved on the

Fiery ES hard disk drive may be irretrievably lost. If problems with the hard disk drive occur, extended storage of the

following data cannot be assured:

•

Third-party fonts

•

Print jobs

•

Color profiles, including profiles downloaded or edited using Spot-On

•

Job notes and instructions

•

Scanned image data

•

Jobs edited using Impose

•

Variable data documents

•

Address books

•

Fiery ES configuration information (list of all the settings currently in effect)

In Command WorkStation, click

Clear Server

from the

Server

menu.

For instructions on how to turn on and turn off the Fiery ES, see

Powering the Fiery ES on or off

on page 20.

Configuration and Setup

Administration

Содержание Fiery ES IC-418




















































































































































































































































Результаты поиска

Содержание Fiery ES IC-418

Отзывы:

EFI Fiery ES IC-418, Конфигурация и настройка, Страница: 34 / 243

Результаты поиска

Содержание Fiery ES IC-418

Отзывы: