EFI Fiery ES IC-418, Конфигурация и настройка, Страница: 114 / 243

You can set up folders in the root of the flash drive to correspond to the Fiery ES queues:
•
To send files to one of the standard print queues (print, hold, or direct) on the Fiery ES, create folders with those
names in the root of the flash drive, and then drop the files into the folders.
•
To print any file from the USB flash drive, manually select the file to print, specify where to send it, and select
print options.
•
Files in folders with Fiery ES queue names at the root level of the USB flash drive are copied automatically to the
corresponding Fiery ES queue.
•
To send files to a virtual printer that is configured on the Fiery ES, create a folder with the virtual printer name in
the root of the flash drive, and then drop the files into the folder. Verify with your administrator that the virtual
printers are published. For more information about virtual printers, see Command WorkStation Help .
Note:
If you have more than 50 published virtual printers, you cannot print from a USB flash drive to a virtual
printer.
Print files automatically from a USB flash drive
You can print files automatically from a USB flash drive only if automatic printing is turned on in Configure.
1
Ensure the USB port and automatic printing are enabled, as described in Configuration and Setup or Command
WorkStation Help .
2
Create folders at the top (root) level of the USB flash drive named print, hold, direct, and the name of any virtual
printer that has been configured and published on the Fiery ES.
3
Save the files (DOC, EPS, PCL, PDF, PPT, PS, TIFF, or XLS) from either the Mac OS or Windows computer to
the USB flash drive, placing the files in the folders that correspond to the action that you want to take.
4
Connect the USB flash drive to the USB port on the Fiery ES.
The files are automatically printed or held according to the folder they are in.
For the location of the USB port, see
Configuration and Setup .
5
After the files have arrived in the related queue, remove the USB flash drive from the Fiery ES.
Important:
Make sure that the USB flash drive is properly stopped before you disconnect it from the Fiery
ES.
Print files manually from a USB flash drive
You can select files to print from a USB flash drive connected to the Fiery ES.
When
USB Media Autoprint
is disabled in Configure, you must manually select the files that you want to print from
the USB flash drive and specify where you want to send them
1
Ensure the USB port is enabled, as described in Configuration and Setup or Command WorkStation Help .
2
Insert the USB flash drive into a USB port on the Fiery ES.
3
On the printer control panel, press the
Menu
button.
Printing
Other Printing Methods
54