EFI Fiery ES IC-418, Конфигурация и настройка, Страница: 28 / 243

Data that cannot be guaranteed
If technical difficulties occur on the Fiery ES, we cannot assure storage of the following data:
•
Print jobs
•
Print job notes and instructions
•
Scanned image data
•
Jobs edited using Fiery Impose
•
Variable data printing (VDP) job information
•
Third-party fonts
•
Color profiles, including profiles downloaded or edited using the Fiery ES Spot-On feature
•
Fiery ES virtual printers
•
Fiery ES configuration settings
Backing up and restoring the Fiery ES system image
The Fiery ES can be backed up and restored through Fiery System Restore, available through WebTools. Fiery
System Restore includes a feature for scheduling automatic back ups.
You can create two types of system image: a factory default image and a customized image.
A factory default image has the following characteristics:
•
Can only be saved as bootable image
•
Includes the factory default versions of both the software and the configuration settings
•
Can be restored to the same Fiery ES unit and to other Fiery ES units
A customized image has the following characteristics:
•
Can be saved as bootable or non-bootable image (we recommend creating a bootable image to ensure the ability
to efficiently restore the system in any circumstance)
•
Includes any installed software updates plus the current state of the configuration settings
•
Can only be restored to the same Fiery ES unit
Note:
For details about what is included with each type of system image, refer to the back up and restore methods
table in this chapter.
Back up and restore methods for the Fiery ES system image
If the hard disk is functioning, you can restore the Fiery ES from a non-bootable image. You can also restore the
Fiery ES from a bootable image without booting from the image.
If the hard disk is not functioning, it must be restored from a bootable image by the service technician.
You can use the factory image to restore any Fiery ES unit. However, a customized image can only be used to restore
the same Fiery ES unit used to create the image.
Configuration and Setup
Administration
28