EFI Fiery ES IC-418, Конфигурация и настройка, Страница: 200 / 243

For optimal performance, calibrate whenever there is a noticeable change in print quality or printing results are not
as expected.
If you must split a print job into two or more batches to print at different times, it is important to calibrate before
you print each batch. You should also calibrate the Fiery ES after printer maintenance or printer calibration.
However, because the printer may be less stable immediately after maintenance, wait until you have printed
approximately 50 pages before you calibrate.
Note:
Because output from the printer is very sensitive to changes in temperature and humidity, do not install the
printer near a window, in direct sunlight, or near a heater or air conditioner. Paper is also sensitive to climate
changes. Store it in a cool, dry, stable environment, and keep reams sealed until they are used.
To monitor print quality, print a color reference page. A good reference page includes fully saturated color patches
and pale tints of cyan, magenta, yellow, and black. Images with skin tones offer a good basis for comparison. Save and
periodically compare the pages you print. If a noticeable change in appearance occurs, calibrate the Fiery ES.
When you examine the reference page, all color patches should be visible, even though they may be very faint in the
five to two percent range. Each patch set should show uniform gradation from patch to patch as the color lightens
from 100% to zero.
If the solid density patches (100% cyan, magenta, yellow, or black) look less saturated over time, show the pages to
your service technician to determine whether adjusting the printer can improve output.
Color Printing
Calibration
36