60
Service Guide: Fiery Central Solo for KM
Troubleshooting
Table 2:
Verifying the system
Conditions to verify
Part and additional page references
When problem occurs, verify that:
•
Power cable is connected properly into the power outlet.
•
Chassis fan is operating.
•
Network link activity LED on network port is blinking.
•
All external cables required are present, in correct connectors,
and well-seated.
•
Cables, cable connectors, and mating connectors appear undamaged.
External ports and cable connections,
If problem occurs at power up or reboot, verify that:
•
Activity light on the control panel illuminates.
•
Display window lights up.
•
The system does not hang, nor do error messages occur
before the systems reaches Idle.
•
DVD drive is present and no disk is in the drive.
•
DVD LED blinks briefly.
•
After the system reaches Idle, the control panel buttons function.
Control panel,
•
All replaceable parts are:
•
Present
•
Properly aligned
•
Installed securely
•
Installed on the appropriate site
•
The correct part for the system
•
Properly configured, if configurable (such as hard disk drive jumper)
•
Appear undamaged
•
Chassis and contents have not been tampered with.
•
Chassis does not contain any foreign objects.
Chassis
•
Motherboard, including components and traces, appears undamaged,
and no foreign objects are evident.
•
CPU is present, well-seated, and appears undamaged.
•
CPU cooling assembly is well-aligned and firmly attached.
•
Each fan required (including fan cable) is well-positioned (not upside
down), powered by the correct motherboard connector, and appears
undamaged.
•
Boards required on the motherboard are present, well-seated, and in the
correct slots.
•
Each DIMM is well-seated.
•
Battery is installed.
•
BIOS is well seated.
Motherboard,
