52
Service Guide: Fiery Central Solo for KM
Installing FC Solo Software
8
Wait while the files are installed and set up on the FC Solo.
It may take more than 10 minutes to complete this step. The progress bar will be displayed both on the monitor and
the FC Solo control panel.
When this step is complete, the FC Solo will restart. Wait until the Windows Log On screen displays.
9
At the
Windows Log On
screen, enter the
password
for the user Admin and press
Enter
.
The default password is
Fiery.1
. The password is case-sensitive.
10
When a message is shown asking to install the hardware security key, insert the hardware security key to one of the
USB port on the FC Solo and click
OK
.
11
At the License Manager window, enter the activation key.
Refer to “Installing the hardware security key” and “Configuring FC Solo” for more information.
Installing the hardware security key
A hardware security key must be installed on the server computer prior to installation. The hardware security key
maintains your serial number and license information.
To install the hardware security key
1
Shut down the FC Solo.
