manualshive.com logo in svg

EFI Fiery Central Solo, Руководство по обслуживанию, Страница: 54 / 72

Поделиться
Скачать
EFI Fiery Central Solo Скачать руководство пользователя страница 54

54

Service Guide: Fiery Central Solo for KM

Installing FC Solo Software

•

Printers per Group 

- indicates the number of print devices that may be in a Printer Group, which can include any 

combination of black-and-white and color printers. A maximum of 16 print devices may be in a Printer Group.

Note: 

A maximum of 10 Printer Groups may be created for each Fiery Central server.

To enter Fiery Central server licensing information

1

Locate the Fiery Central Server License Form packaged with the FC Solo hardware security key. 

This form contains the hardware security key serial number and licensing information.

2

If necessary, choose Start  > 

All  apps  

 >    

Fiery Central 

> 

License Manager

 from the 

Windows taskbar 

to access the 

License Manager.

or

In Command WorkStation, select 

Device Center > General > Tools

, then click 

Launch FC License Manager.

or

Right-click the 

Fiery Central tray icon 

and select 

Fiery Central License

.

If you have installed the FC Solo software to a folder other than the default location, find the FC Solo program 

folder to start the License Manager.

3

Type the activation key code exactly as provided on the Fiery Central Server License Form included in your FC 

Solo software package, and click 

OK

.

When you type the correct activation key, the installer confirms with the message “License Installed” and updates 

the current license information.

4

Click 

OK

 to close the License Manager

.

Configuring FC Solo

Some options in Setup are automatically configured when you install FC Solo and do not need to be changed. 

If you have just completed installation, the Fiery Central Manager window may already be open on the screen. The 

Fiery Central tray icon

 appears on the taskbar at the lower-right corner of the screen. When you hover the cursor on 

the 

Fiery Central tray icon

, 

Fiery Central Started 

appears, indicating that the Fiery Central server is running.

The FC Solo Manager allows you to create the Fiery Central server Printer Groups, add new printers, and change 

Printer Group settings. It also allows you to configure VDP settings and DSF connection settings. Fiery Central 

Manager is available from the 

Fiery Central tray icon

.

Note: 

You must be logged on to the Fiery Central Server with an administrator account to open Fiery Central 

Manager.

Содержание Fiery Central Solo









































































Отзывы:

Нет отзывов