•
Use a soft cloth moistened with Lens and Mirror Cleaner to clean the surface of the FC Solo display window.
Other solvents, such as water, may damage the polarizer on the display window.
•
When connecting or disconnecting the power cord:
•
Only use the power cord that shipped with the FC Solo or an appropriate replacement power cord available from
an authorized provider.
•
Always disconnect the power cord from the FC Solo connector panel before opening the unit and servicing
internal components.
•
Do not pull on the power cord when unplugging the FC Solo. Pull the plug instead.
•
Do not place objects on the power cord. Place the power cord away from foot traffic.
•
Do not tamper with or disable the power cord grounding plug.
•
Do not use a 3-prong adapter in a 2-hole, ungrounded power outlet.
•
Do not use an extension cord.
•
Do not plug the FC Solo into a circuit with heating or refrigeration equipment (including water dispensers).
•
Do not plug the FC Solo into a switchable power outlet. This can result in the FC Solo being turned off
accidentally.
•
Do not attempt to open the power supply, DVD drive, or hard disk drive.
•
Handle the FC Solo LCD window with care.
If the FC Solo LCD window breaks and the liquid crystal inside leaks out, avoid contact with it. If you come in
contact with the liquid crystal, wash it off your skin with soap and water immediately.
•
Use care when handling parts of the FC Solo, as some edges on the unit may be sharp.
•
Do not install third-party applications onto the FC Solo. Third-party applications are not supported and can cause
system problems. Although virus scans are permitted on the FC Solo, virus-protection software should not be
loaded in memory-resident mode.
•
Do not change the Windows operating system preference settings.
Depending on the changes made, the FC Solo may become unstable or even unusable. If this occurs, it is
recommended that you reinstall the FC Solo System Software, which reliably restores the Windows operating
system to its factory defaults.
DANGER
The FC Solo contains hazardous moving parts. When servicing the FC Solo, keep away from moving
fan blades.
