Effekta ABADX120009XX600, Руководство по эксплуатации, Страница: 69 / 88

UPS Adira (6kVA, 6kVA XL, 10kVA,
10kVA XL 1-phase) Troubleshooting
Adira series 69
Battery Over Voltage Battery voltage is higher than
normal value. Check if the battery quantity is
right.
Over Charge The battery is over-charged.
The UPS will turn off the charger
until the battery voltage is nor-
mal.
Model Pin Error UPS internal fault. Consult dealer.
Ambient Over
Temperature The ambient temperature is
too high. Check the environment ventila-
tion.
Heatsink Over
Temperature The inside temperature of the
UPS is too high. Check the ventilation of the UPS
and the ambient temperature.
Ambient NTC abnormal UPS internal fault. Consult dealer.
Para Cable Male Loss The parallel cable is discon-
nected. Check the parallel cable.
Para Cable Female Loss The parallel cable is discon-
nected. Check the parallel cable.
Para Bat Differ The battery packs of some
UPSs are disconnected Check if all the battery packs are
connected.
Para Line Differ
The mains input of some
UPSs is disconnected. Check the building wiring and
input cable.
Check if the input breaker is
closed.
Ensure the UPSs are connected
to same input source.
Para Work Mode Differ
There are different power
strategy settings
within a parallel system. UPSs with different power strat-
egy settings (e.g. one line mode
and one converter mode) are not
permitted in a parallel system.
Para Rate Power Differ There are different UPSs in
parallel system. UPSs with different capacity
(e.g. one 6KVA and one 10KVA)
are not permitted in a parallel
system.
ECO In Para HE (High Efficiency) function
is activated in a parallel sys-
tem. HE (High Efficiency) function is
not permitted in parallel system.
IP Fuse Open Input fuse break. Check the input fuse status.
8.2 Troubleshooting according to fault indication
Problem Displayed Possible cause Troubleshooting measures
Inv Overload Fault Overload.
Check the loads and remove
some non-critical loads.
Check if some loads have failed.
Byp Overload Fault Overload. Check the loads and remove