Effekta ABADX120009XX600, Руководство по эксплуатации, Страница: 52 / 88

UPS Adira (6kVA, 6kVA XL, 10kVA,
10kVA XL 1-phase) Operation
Adira series 52
If a fault is detected in the battery like e.g. "battery not connected" or "poor bat-
tery status", the display looks as follows:
Fig. 7-11 Battery fault
7.2 UPS operating instructions
The operator of the UPS-system must always adhere to the instructions in
this operating manual. The operator may only carry out the following
measures and must always exercise particular care:

Use of the operating controls: switching-on, starting and switching-
off the UPS.

Reading of the display messages and interpretation of the acoustic
warning signals.

Triggering the test mode.

Using the communication interface, whereby the connection to the
PC or other systems must already be established for UPS-devices
with permanent wiring.
Due to the extensive protective functions the UPS-system performs in re-
lation to the appliance/s, the UPS operates fully automatically. The opera-
tor only carries out the switching-on and starting or switching-off of the
device. In addition, a data exchange can take place via the communication
interface or the SNMP-adapter, however, this is not absolutely necessary
for the general operation of the system.