manualshive.com logo in svg
background image

19

Deutsch

Español

Nederlands

PUESTA EN MARCHA

STARTEN

MEZCLA COMBUSTIBLE (Fig. 25-26)
Emplee combustible (mezcla de gasolina/aceite) al 4% (25:
1).
 Con aceite PROSINT OLEO - MAC / EFCO usar mezcla 
al 2% (50:1).

ATENCIÓN: - Los motores de dos tiempos tienen una 
potencia específi ca elevada, por lo cual se aconseja el 

uso de gasolina sin plomo de marca conocida, con un 
número de octanos no inferior a 90
LAS LEYES LOCALES 
REGLAMENTAN EL TIPO DE GASOLINA QUE DEBE 
UTILIZARSE (CON O  SIN PLOMO). ES OBLIGATORIO 
RESPETARLAS.

-    Conserve la gasolina, el aceite y la mezcla en recipientes 

homologados (Fig.27).

-   En la preparación de la mezcla, utilice sólo aceite 

específi co para motores de dos tiempos (Fig.28).

-   Agite el bidón de la mezcla antes de verterla (Fig.29).
-   Cargue siempre el combustible con el mo tor apagado y 

lejos de cualquier llama  (Fig.30).

-   Antes de desenroscar el tapón del depósito, apoye la 

podadora en una superfi cie llana y fi rme de modo que no se 
tumbe. Abra con cuidado el tapón para aliviar lentamente el 
exceso de presión y evitar que el combustible salpique.

-    Prepare sólo la mezcla necesaria para el uso; no la deje 

en el depósito o en el bidón durante mucho tiempo. Se 
aconseja utilizar aditivo ADDITIX 2000 de Emak, cód. 
001000972  (Fig.31), para conservar la mezcla durante 
un año.

ATENCIÓN – Inhalar los gases de escape es nocivo 
para la salud.

BENZINEMENGSEL (Fig. 25-26)
Voor normaal gebruik een 4% (25:1) mengsel gebruiken.
Met de PROSINT OLEO - MAC / EFCO olie een 2% mengsel 
50:1 gebruiken.

LET OP:  – De tweetaktmotoren hebben een hoog specifi ek 
vermogen, wij adviseren derhalve het gebruik van loodvrije 

ben zi ne  van een bekend merk, met een octaangehalte van 
minstens 90. 
 HET TYPE BENZINE DAT GEBRUIKT MOET 
WORDEN (LOODHOUDEND OF LOODVRIJ) IS BIJ DE WET 
GEREGELD. NEEM DEZE VOORSCHRIFTEN IN ACHT!

-    Bewaar de benzine, de olie en het mengsel in goedgekeurde 

containers (Fig. 27).

-    Gebruik bij de bereiding van het mengsel uitsluitend olie die 

specifi ek bedoeld is voor tweetaktmotoren (Fig. 28).

-     Schud de jerrycan met het mengsel alvorens de tank te vullen 

(Fig. 29).

-    Vul de brandstoftank altijd met uitgeschakelde motor en uit 

de buurt van vlammen (Fig. 30).

-   Leg de hoogsnoeier op een vlakke, stevige ondergrond 

alvorens de dop van de tank los te schroeven, zodat het 
apparaat niet kan omvallen. Maak de dop voorzichtig open 
om de hoge druk langzaam af te voeren en om te vermijden 
dat de brandstof naar buiten spat.

-    Bereid alleen de hoeveelheid mengsel voor die nodig is voor 

het gebruik; laat het niet lange tijd in de tank of de jerrycan 
zitten. Het wordt geadviseerd de toevoeging ADDITIX 2000 
van Emak art. nr. 001000972 (Fig. 31) te gebruiken, om het 
mengsel een jaar lang te kunnen bewaren.

LET OP – Het inademen van het uitlaatgas is schadelijk 
voor de gezondheid.

STARTVORGANG

KRAFTSTOFFGEMISH (Abb. 25-26)
Benzin-/Ölgemisch 4% (25:1)
Öl PROSINT OLEO - MAC / EFCO verwenden Sie 2% (50:1).

ACHTUNG: – 2-Takt-Motoren haben eine hohe spezifi sche 
Leistung, so dass Sie bleifreies Benzin bekannter 

Marken mit einer Oktanzahl von mindestens 90 verwenden 
sollten.  ÖRTLICHE VORSCHRIFTEN REGELN DIE ZU 
VERWENDENDE BENZINART (VERBLEIT ODER BLEIFREI) 
DIESE VORSCHRIFTEN SIND STRIKT EINZUHALTEN!

-   Bewahren Sie das Benzin, Öl und Gemisch in genormten 

Behältern auf (Abb.27).

-     Verwenden Sie zur Aufbereitung des Gemischs ausschließlich 

Öl für 2-Takt-Motoren (Abb. 28).

-   Schütteln Sie den Gemischkanister vor dem Auftanken 

(Abb.29).

-   Tanken Sie stets bei abgestelltem Mo tor und von Flammen 

entfernt (Abb.30).

-   Damit beim Aufdrehen des Tankverschlusses kein 

Kraftstoffgemisch verschüttet wird, stellen Sie den Hoch-
Entaster auf eine ebene und standfeste Fläche ab. Öffnen 
Sie den Verschluss äußerst vorsichtig, um den Tankdruck 
langsam entweichen zu lassen und ausspritzenden Kraftstoff 
zu vermeiden.

-    Mischen Sie jeweils nur die erforderliche Kraftstoffmenge an. 

Das fertige Kraftstoffgemisch darf nur kurze Zeit im Tank bzw. 
Kanister bleiben. Mit Beigabe des Zusatzstoffs ADDITIX 2000 
von Emak Bestellnummer 001000972  (Abb.31)  können Sie 
das Gemisch für den Zeitraum eines Jahres aufbewahren.

ACHTUNG – Das Einatmen der Abgase ist 
gesundheitsschädlich.

29

30 31

Содержание PP 250

































Отзывы: