Manual Logos
EELA AUDIO Parmentierweg 3
4
Rev. 6
(July 2001)
5657 EH Eindhoven, the Netherlands
Main v1.43
Holding the button down longer (long-press function) activates the source dependent set-up
menu. In this menu you can set both gain and balance level for that source.
Pushing the button shortly (short-press function) activates the prefade listening (PFL). The
speakers, headphone and program level meter reproduce the signal of the selected source.
The last two buttons are used for monitoring the Main output and the Talkback function.
Holding the <Main O/P> button longer gives access to the Compressor/Limiter menu of the
main output.
For access to the Microphone setting menu, both <Talk> and <Main O/P> must be
long-pressed together. For more information on this subject see paragraph 3.3.
Talkback button
The talkback button is a push-to-talk function. The main microphone is used as talkback
microphone; there is no separate talkback-microphone.
The red LED will indicate if this function is active. The talkback-function is allowed with open
fader or not, depending on the device to talk to.
The program level meter
This modulation meter consists of 2*18 LED’s. The character of the meter is a PPM with a
peak-hold function. The meter follows the signal selected by the PFL / Monitor selector. The
external meter connection on the back of the rack always carries the main signal.
1.4 Function keys
Concerning the function keys, 2 buttons always have the same function. The <ESC> button
is for quitting a function and the <ENTER> button for confirming a change. The other keys
follow the function as indicated on the display.
1.5 Numeric keypad
Primary use of the numeric keypad is for manual dialling of telephone hybrids like the
EA915x. The keypad is also used for controlling audio editors. For this purpose, the <2>,
<4>, <6>, <8> and <#> keys are used. At last, the keypad is also used within menus for
changing the menu setting.
TALK
MAIN
O/P
