Manual Logos
EELA AUDIO Parmentierweg 3
11
Rev. 6
(July 2001)
5657 EH Eindhoven, the Netherlands
Main v1.43
3.3 Tabs
Depending on the number of input / output modules used, the LogosTool will display a
number of tabs, in which all kinds of parameters can be changed.
Hardware tab
This tab shows the configuration of the
modules. The Logos does not
automatically detect which kind of input
module is present.
Selecting or de-selecting an input module
will make the corresponding tab appear
or disappear.
Global Tab
Here you can configure the function of the global GPIO and set the name and type of audio
editor used.
Moving the cursor over the GPIO functions will open a Windows balloon with the pin
numbers used of the GPIO connector. The back of the rackunit holds the 9 pole sub-D
connector for the two GPI’s and the two GPO’s.
Possible functions for GPI-A and GPI-B (inputs) are:
•
None
•
Cough all
•
Cough microphone 1
•
Monitor mute
Remark: engaging the cough function for a studio microphone will mute the microphone
input, dim the monitor speakers and switch the studio microphone(s) to the monitor in order
to be able to talk to operator off-air. A blinking LED on the monitor button indicates this
function.