Manual Logos
EELA AUDIO Parmentierweg 3
6
Rev. 6
(July 2001)
5657 EH Eindhoven, the Netherlands
Main v1.43
2 The rack-unit (D902)
2.1 Front side connectors
DIGITAL I/P
L
INPUT 1
R
HPH 1
POWER
D 902
Digital input
The most left input of the rack-unit is the AES/EBU and SPDIF tolerant digital input. The
audio modes of this input can be configured in the LogosTool.
Setting the gain level for this input can be done by long-pressing the <Front DIG> key in the
Monitor section, which opens the set-up menu for this input.
Balanced analogue stereo input
These are the two XLR female input connectors right next of the digital input connector. This
analogue input is basically meant for temporary connection of analogue equipment without
remote control, e.g. portable recorders. The audio modes can be configured with the
LogosTool.
Setting the gain level for this input can be done by long-pressing the <Front I/P> key in the
Monitor section, which opens the set-up menu for this input.
Headphone connector
The headphone connector is a ¼ inch jack connector. Level control for the headphone is
done on the desktop console.
Power On switch / LED
On the right side of the unit are the Power On switch and an indication LED. If the unit is
switched on the red indicator will light. A blinking LED will indicate the Program Mode of the
Logos or an operation fault indication (see also Part B of this manual).
