Edwards STP-301 Series, Инструкция по эксплуатации

Страница: 6 / 122

STP-301/451 Series Instruction Manual
5
STP-301/451
Series
◇
Use the STP connection cable that has a label affixed
The use of different cables may result in product damage.
◇
Connect the cables securely. NEVER bend nor place heavy objects on the cable.
Doing so may result in electric shock or product damage.
◇
NEVER remove the splinter shield from the STP pump. Doing so may result in product
damage.
◇
DO NOT put foreign objects into the STP pump. Doing so may result in product damage.
◇
Alw ays use the pow er voltage specified on the nameplate for the primary pow er voltage
of the STP control unit. Wire the pow er cable securely. Incorrect w iring may result in
electric shock or product damage.
◇
The w ipes used for clean the flange of the pump might become hazardous w aste
depending upon the solvent (alcohol). Dispose of the contaminated w ipes appropriately
according to the regulations of each national and/or local government.
◇
NEVER turn OFF the primary pow er (DO NOT sw itch the breaker “OFF”) w hile the STP
pump is rotating. Doing so may result in product damage.
◇
Perform investigations into probable causes and remove them before restarting the STP
pump in the event of the occurrence of a problem. The use of the abnormal STP pump
may result in product damage.
◇
DO NOT move the STP pump and the STP control unit w hile the STP pump is in operation.
Doing so may result in product damage.