EDNord magicolor 2450 Скачать руководство пользователя страница 68

Страница: 68 / 168

Media Types

Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.

Layered

Adhesive

Folded, creased, curled, embossed, warped, or wrinkled

Perforated, three-hole punched, or torn

Too slick, too coarse, or too textured

Different in texture (roughness) on the front and back

Too thin or too thick

Stuck together with static electricity

Composed of foil or gilt; too luminous

Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])

Irregularly shaped (not rectangular or not cut at right angles)

Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons

Acidic

Any other media that is not approved

Thick Stock

Paper thicker than 90 g/m

(24 lb bond) is referred to as thick stock. Test all

thick stock to ensure acceptable performance and to ensure that the image
does not shift.

43 lb bond is also referred to as 90 lb index stock.

DO NOT use thick stock that is

Mixed with any other media in the trays (as this will cause printer misfeed-
ing)

Capacity

Tray 1

Up to 50 thick stock sheets, depending on
their thickness

Tray 2

Not supported

Orientation

Face up

Driver
Media Type

Thick

Weight

91 to 163 g/m² (25 to 43 lb bond)

Duplexing

Not supported

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Содержание magicolor 2450









































































































































































Результаты поиска

Содержание magicolor 2450

Отзывы:

EDNord magicolor 2450, Руководство пользователя, Страница: 68 / 168

Результаты поиска

Содержание magicolor 2450

Отзывы: