Edges 17105, Инструкция по эксплуатации

Страница: 25 / 36

25
ENGLISH
INSTRUCTION MANUAL
Attach the left arm (9) to the left upright (2).
Attach the right arm (10) to the right upright (1).
Screw a bar (12) securely to each arm (9, 10).
Slot a pad (15) onto each bar (12).
Slot a rubber collar (17) onto each arm (9, 10)
where the arm meets the crossbar (3).
Insert cover plugs (21) into the ends of the back
supports (7).
Attach the two back supports (7) securely to the
seat bar (6)
Screw the backrest (13) securely to the back
supports (7).
Screw the seat (14) securely to the seat bar.
Use
Adjust the incline of the backrest (i) by moving
the loose crossbar (c).
Slide the required number of weight discs onto the
load bars (g) and lock them securely using the
locks.
If you use a barbell, you can lock it securely in the
barbell holders (a) using the locks (b), so that it
does not accidentally fall.
The training bench is very versatile and can be
used in various ways. Why not try some of these
training exercises:
Exercising your legs
Sit on the seat with your back against the
backrest. Place your feet behind the lowest pads.
Place your hands behind your neck. Lift your legs
out and up so that the leg bar moves. Keep up the
pressure and then allow the leg bar to return to its
start position.
Exercising your arms and shoulders
Sit on the seat with your back against the
backrest. Take hold of the arms and pull them in
towards you. Keep up the pressure and then allow
the arms to return to their start position.
Exercising your arms
Move the backrest to the horizontal position. Lie
on the bench with your knees bent and your feet
on the floor and use a barbell to exercise.
Remember to always have a spotter beside you
when exercising with a barbell.