Edges 17103, Инструкция по эксплуатации

Страница: 24 / 36

24
ENGLISH
INSTRUCTION MANUAL
Assembly instructions
Tap the cover plugs (25) into the T-piece (2) and
the rear foot (3) using a rubber mallet.
Insert the two vertical guide rods (4) through the
large rubber rings (44) and into the holes on the
rear foot (3).
Screw the T-piece (2) and the rear foot (3)
together.
Slide the weight discs (32) carefully down over the
horizontal guide rods (4).
Screw the top plate (31) securely to the load rod
(33). Push the load rod down through the central
holes in the weight discs.
Screw the inclined column (1) securely to the T-
piece (2).
Screw the backrest (9) securely to the inclined
column (1).
Screw the top bar (5) securely to the vertical guide
rods (4).
Screw the top bar (5) securely to the inclined
column (1) using a screw plate (27).
Screw the pulley fittings (15) securely to the
inclined column (1).
Tighten all the screws.
Push the cover plugs (22, 24) into the openings.