Edge-Core ES4528V-38 Скачать руководство пользователя страница 59

Страница: 59 / 396

HAPTER

| Configuring the Switch

Setting an IP Address

– 59 –

SAGE

UIDELINES

◆

All IPv6 addresses must be formatted according to RFC 2373 “IPv6

Addressing Architecture,” using 8 colon-separated 16-bit hexadecimal

values. One double colon may be used in the address to indicate the

appropriate number of zeros required to fill the undefined fields.

◆

When configuring a link-local address, note that the prefix length is

fixed at 64 bits, and the host portion of the default address is based on

the modified EUI-64 (Extended Universal Identifier) form of the

interface identifier (i.e., the physical MAC address). You can manually

configure a link-local address by entering the full address with the

network prefix FE80.

◆

To connect to a larger network with multiple subnets, you must

configure a global unicast address. There are several alternatives to

configuring this address type:

■

The global unicast address can be automatically configured by

taking the network prefix from router advertisements observed on

the local interface, and using the modified EUI-64 form of the

interface identifier to automatically create the host portion of the

address. This option can be selected by enabling the Auto

Configuration option.

■

You can also manually configure the global unicast address by

entering the full address and prefix length.

ARAMETERS

The following parameters are displayed on the IPv6 & Time page:

IPv6 Configuration

◆

Auto Configuration

– Enables stateless autoconfiguration of IPv6

addresses on an interface and enables IPv6 functionality on the

interface. The network portion of the address is based on prefixes

received in IPv6 router advertisement messages, and the host portion

is automatically generated using the modified EUI-64 form of the

interface identifier; i.e., the switch's MAC address. (Default: Disabled)

◆

Address

– Manually configures a global unicast address by specifying

the full address and network prefix length (in the Prefix field).

(Default: ::192.168.2.10)

◆

Prefix

– Defines the prefix length as a decimal value indicating how

many contiguous bits (starting at the left) of the address comprise the

prefix; i.e., the network portion of the address. (Default: 96 bits)

Note that the default prefix length of 96 bits specifies that the first six

colon-separated values comprise the network portion of the address.

Содержание ES4528V-38













































































































































































































































































































































































































Результаты поиска

Содержание ES4528V-38

Отзывы:

Edge-Core ES4528V-38, Руководство по управлению, Страница: 59 / 396

Результаты поиска

Содержание ES4528V-38

Отзывы: