manualshive.com logo in svg

Edge-Core ES4528V-38, Руководство по управлению, Страница: 159 / 396

Поделиться
Скачать
Edge-Core ES4528V-38 Скачать руководство пользователя страница 159

C

HAPTER

 5

  |  Monitoring the Switch

Displaying Information on Authentication Servers

–  159  –

■

Bad Authenticators

 - The number of RADIUS Access-Response 

packets containing invalid authenticators or Message Authenticator 

attributes received from this server.

■

Unknown Types

 - The number of RADIUS packets of unknown 

type that were received from this server on the authentication port.

■

Packets Dropped

 - The number of RADIUS packets that were 

received from this server on the authentication port and dropped for 

some other reason.

◆

 

Transmit Packets

■

Access Requests

 - The number of RADIUS Access-Request 

packets sent to this server. This does not include retransmissions.

■

Access Retransmissions

 - The number of RADIUS Access-

Request packets retransmitted to this RADIUS authentication 

server.

■

Pending Requests

 - The number of RADIUS Access-Request 

packets destined for the server that have not yet timed out or 

received a response. This variable is incremented when an Access-

Request is sent and decremented due to receipt of an Access-

Accept, Access-Reject, Access-Challenge, timeout, or 

retransmission. 

■

Timeouts

 - The number of authentication timeouts to the server. 

After a timeout, the client may retry to the same server, send to a 

different server, or give up. A retry to the same server is counted as 

a retransmit as well as a timeout. A send to a different server is 

counted as a Request as well as a timeout.

◆

Other Info

■

State

 - The current state of the server. This field takes one of the 

following values:

■

Disabled

 - The server is disabled.

■

Not Ready

 - The server is enabled, but IP communication is not 

yet up and running.

■

Ready

 - The server is enabled, IP communication is up and 

running, and the RADIUS module is ready to accept access 

attempts.

■

Dead

 (X seconds left) - Access attempts were made to this 

server, but it did not reply within the configured timeout. The 

server has been temporarily disabled, but will be re-enabled 

when the dead-time expires. The number of seconds left before 

this occurs is displayed in parentheses. 

Содержание ES4528V-38













































































































































































































































































































































































































Отзывы:

Нет отзывов