Edge-Core ES4528V-38 Скачать руководство пользователя страница 348

Страница: 348 / 396

HAPTER

| SNMP Commands

– 348 –

used to compute the security digest for authenticating and

encrypting packets sent to a user on the remote host.
SNMP passwords are localized using the engine ID of the

authoritative agent. For informs, the authoritative SNMP agent is

the remote agent. You therefore need to configure the remote

agent's SNMP engine ID before you can send proxy requests or

informs to it. (See the

snmp trap security engine id

command on

page 344

user-name

- The name of user connecting to the SNMP agent.

(Range: 1-32 characters, ASCII characters 33-126 only)

md5

sha

- The method used for user authentication.

auth-password

- A plain text string identifying the authentication

pass phrase. (Range: 1-32 characters for MD5, 8-40 characters for

SHA)

des

- The encryption algorithm use for data privacy; only 56-bit

DES is currently available.

priv-password

- A string identifying the privacy pass phrase.

(Range: 8-40 characters, ASCII characters 33-126 only)

EFAULT

ETTING

Authentication method: MD5

OMMAND

SAGE

◆

Each SNMPv3 user is defined by a unique name and remote engine ID.

Users must be configured with a specific security level, and the types of

authentication and privacy protocols to use.

◆

Any user created with this command is associated with the group

assigned to the USM Security Model with the

snmp group add

command

(

page 350

), and the views assigned to that group with the

snmp view

add

command (

page 352

◆

Up to 64 user names can be configured.

XAMPLE

SNMP/User>add 800007e5017f000009 steve sha elephant des hippopotams

SNMP/User>

snmp user delete

This command deletes an SNMPv3 user entry.

YNTAX

snmp user delete

index

- Index to SNMPv3 user table. (Range: 1-64)

EFAULT

ETTING

None

Содержание ES4528V-38













































































































































































































































































































































































































Результаты поиска

Содержание ES4528V-38

Отзывы:

Edge-Core ES4528V-38, Руководство по управлению, Страница: 348 / 396

Результаты поиска

Содержание ES4528V-38

Отзывы: