Edge-Core ES4528V-38 Скачать руководство пользователя страница 173

Страница: 173 / 396

HAPTER

| Monitoring the Switch

Displaying Port Security Information

– 173 –

Transmit Backend Server Counters

◆

Responses

For port-based authentication, this field counts the number of times

that the switch attempts to send a supplicant's first response packet to

the backend server. This indicates that the switch has attempted

communication with the backend server. Possible retransmissions are

not counted.
For MAC-based authentication, this field counts all the backend server

packets sent from the switch towards the backend server for a given

port (left-most table) or client (right-most table). Possible

retransmissions are not counted.

Last Supplicant Info

◆

Version

- For port-based authentication, this field indicates the

protocol version number carried in the most recently received EAPOL

frame. For MAC-based authentication, this field is not applicable.

◆

Source

- For port-based authentication, this field indicates the source

MAC address carried in the most recently received EAPOL frame. For

MAC-based authentication, this field is not applicable.

◆

Identity

- For port-based authentication, this field shows the user

name (supplicant identity) carried in the most recently received Resp/

ID EAPOL frame. For MAC-based authentication, this field shows the

MAC address of the last client that attempted to authenticate (left-most

table), or the MAC address of the currently selected client (right-most

table).

Содержание ES4528V-38













































































































































































































































































































































































































Результаты поиска

Содержание ES4528V-38

Отзывы:

Edge-Core ES4528V-38, Руководство по управлению, Страница: 173 / 396

Результаты поиска

Содержание ES4528V-38

Отзывы: