manualshive.com logo in svg

Edge-Core ES4528V-38, Руководство по управлению, Страница: 104 / 396

Поделиться
Скачать
Edge-Core ES4528V-38 Скачать руководство пользователя страница 104

C

HAPTER

 4

  |  Configuring the Switch

IEEE 802.1Q VLANs

–  104  –

■

If ingress filtering is enabled and a port receives frames tagged for 

VLANs for which it is not a member, these frames will be discarded. 

■

If ingress filtering is disabled and a port receives frames tagged for 

VLANs for which it is not a member, these frames will be flooded to 

all other ports. 

■

Ingress filtering does not affect VLAN independent BPDU frames, 

such as GVRP or STP. However, they do affect VLAN dependent 

BPDU frames, such as GMRP.

◆

Queue in Queue 

- Determines whether the port accepts double tagged 

frames. If the port doesn't accepts double tagged frames, double 

tagged frames received on the port are discarded. (Default: Disabled)

◆

Frame Type 

- Sets the interface to accept all frame types, including 

tagged or untagged frames, or only tagged frames. When set to receive 

all frame types, any received frames that are untagged are assigned to 

the default VLAN. When set to receive only tagged frames, all untagged 

frames received on the interface are discarded. (Option: All, Tagged; 

Default: All)

◆

Port VLAN Mode

 - Determines how to process VLAN tags for ingress 

and egress traffic. (Options: Specific, None; Default: Specific)

■

Specific

 - If the port is VLAN aware, untagged frames received on 

the port are assigned to the default PVID, and tagged frames are 

processed using the frame’s VLAN ID. If the port is not VLAN aware, 

all frames received on the port are assigned to the default PVID. 
Regardless of whether or not a port is VLAN aware, if the VLAN to 

which the frame has been assigned is different from the default 

PVID, a tag indicating the VLAN to which this frame was assigned 

will be inserted in the egress frame. Otherwise, the frame is 

transmitted without a VLAN tag.

■

None

 - The ID for the VLAN to which this frame has been assigned 

is inserted in frames transmitted from the port. The assigned VLAN 

ID can be based on the ingress tag for tagged frames, or the default 

PVID for untagged ingress frames. Note that this mode is normally 

used for ports connected to VLAN-aware switches.

When forwarding a frame from this switch along a path that contains 

any VLAN-aware devices, the switch should include VLAN tags. When 

forwarding a frame from this switch along a path that does not contain 

any VLAN-aware devices (including the destination host), the switch 

should first strip off the VLAN tag before forwarding the frame. 

◆

Port VLAN ID 

- VLAN ID assigned to untagged frames received on the 

interface. (Range: 1-4095; Default: 1)
The port must be a member of the same VLAN as the Port VLAN ID.

Содержание ES4528V-38













































































































































































































































































































































































































Отзывы:

Нет отзывов