manualshive.com logo in svg

Edge-Core ES3510MA-DC, Руководство по управлению, Страница: 253 / 1098

Поделиться
Скачать
Edge-Core ES3510MA-DC Скачать руководство пользователя страница 253

C

HAPTER

 12

  |  Quality of Service

Creating QoS Policies

–  253  –

P

ARAMETERS

These parameters are displayed:

Add

◆

Policy Name

 – Name of policy map. (Range: 1-16 characters) 

◆

Description

 – A brief description of a policy map. (Range: 1-256 

characters) 

Add Rule

◆

Policy Name

 – Name of policy map.

◆

Class Name

 – Name of a class map that defines a traffic classification 

upon which a policy can act. 

◆

Action – 

This attribute is used to set an internal QoS value in hardware 

for matching packets. The PHB label is composed of five bits, three bits 

for per-hop behavior, and two bits for the color scheme used to control 

queue congestion with the srTCM and trTCM metering functions.

■

Set CoS

 – Configures the service provided to ingress traffic by 

setting an internal CoS value for a matching packet (as specified in 

rule settings for a class map). (Range: 0-7) 

See 

Table 18, "Default Mapping of CoS/CFI to Internal PHB/Drop 

Precedence," on page 243

). 

■

Set PHB

 – Configures the service provided to ingress traffic by 

setting the internal per-hop behavior for a matching packet (as 

specified in rule settings for a class map). (Range: 0-7) 

See 

Table 17, "Default Mapping of DSCP Values to Internal PHB/

Drop Values," on page 240

). 

◆

Meter

 – Check this to define the maximum throughput, burst rate, and 

the action that results from a policy violation.

◆

Meter Mode

 – Selects one of the following policing methods.

■

Flow

 (Police Flow) – Defines the committed information rate (CIR, 

or maximum throughput), committed burst size (BC, or burst rate), 

and the action to take for conforming and non-conforming traffic. 

Policing is based on a token bucket, where bucket depth (that is, 

the maximum burst before the bucket overflows) is specified by the 

“burst” field, and the average rate tokens are removed from the 

bucket is by specified by the “rate” option. 

■

Committed Information Rate

 (CIR) – Rate in kilobits per 

second. (Range: 64-10000000 kbps at a granularity of 64 kbps 

or maximum port speed, whichever is lower) 

The rate cannot exceed the configured interface speed. 

Содержание ES3510MA-DC











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов