Edge-Core ES3510MA-DC Скачать руководство пользователя страница 110

Страница: 110 / 1098

HAPTER

| Basic Management Tasks

Managing System Files

– 110 –

◆

Note that the switch itself does not distinguish between upper and

lower-case file names, and only checks to see if the file stored on the

server is more recent than the current runtime image.

◆

If two operation code image files are already stored on the switch’s file

system, then the non-startup image is deleted before the upgrade

image is transferred.

◆

The automatic upgrade process will take place in the background

without impeding normal operations (data switching, etc.) of the

switch.

◆

During the automatic search and transfer process, the administrator
cannot transfer or update another operation code image, configuration

file, public key, or HTTPS certificate (i.e., no other concurrent file

management operations are possible).

◆

The upgrade operation code image is set as the startup image after it

has been successfully written to the file system.

◆

The switch will send an SNMP trap and make a log entry upon all

upgrade successes and failures.

◆

The switch will immediately restart after the upgrade file is successfully

written to the file system and set as the startup image.

ARAMETERS

The following parameters are displayed:

◆

Automatic Opcode Upgrade

– Enables the switch to search for an

upgraded operation code file during the switch bootup process.

(Default: Disabled)

◆

Automatic Upgrade Location URL

– Defines where the switch should

search for the operation code upgrade file. The last character of this

URL must be a forward slash (“/”). The

es3510ma.bix

filename must

not be included since it is automatically appended by the switch.

(Options: ftp, tftp)

The following syntax must be observed:

tftp://

host

[

filedir

]

■

tftp://

– Defines TFTP protocol for the server connection.

■

host

– Defines the IP address of the TFTP server. Valid IP addresses

consist of four numbers, 0 to 255, separated by periods. DNS host

names are not recognized.

■

filedir

– Defines the directory, relative to the TFTP server root,

where the upgrade file can be found. Nested directory structures

are accepted. The directory name must be separated from the host,

and in nested directory structures, from the parent directory, with a

prepended forward slash “/”.

■

– The forward slash must be the last character of the URL.

Содержание ES3510MA-DC











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ES3510MA-DC

Отзывы:

Edge-Core ES3510MA-DC, Руководство по управлению, Страница: 110 / 1098

Результаты поиска

Содержание ES3510MA-DC

Отзывы: