13
To clean the stainless steel use a sponge or cloth, tepid water and neutral soap.
Do not use abrasive products, solvents, metal cleaning liquids or undiluted detergents.
Dry with a cloth afterwards.
MALFUNCTIONING
The appliance electric motor has a thermal protector included that trips in the
event of overcurrent or lack of current. When this protector trips the appliance must be
disconnected to prevent malfunctioning.
Connect the appliance after an hour and contact your technical service in the
event the problem remains.
Some problems are due to causes that are easily resolved without having to
contact the technical service. Please read the following table carefully:
PROBLEM PROCEDURE
The appliance does not work.
Check that the appliance is correctly connected to the
electricity socket and that the fuses are in good condition and
that the automatic power limiter has not tripped.
Does not cool sufficiently.
Check the regulation of the thermostat and/or influence or
direct sources of heat on the tray. Make sure that the condenser
of the cooling unit is completely clean
Excessive noise when operating.
Make sure that the appliance is correctly levelled.
If any of the copper tubes of the cooling circuit are contacting
one with the other, please separate them.
Check the anchoring system of the appliance elements that
may have moved or become loose.
The evaporator is full of ice and
the appliance does not cool
sufficiently.
Contact your distributor or your Technical Assistance Service.
All the basic checks have been
carried out and the problem
remains.
Contact your distributor or your Technical Assistance Service.
