11
The drainage from the cold tray collects the liquid that may have been
accidentally spilled, and the evaporator defrosting water which on occasions and
depending on the climate can be considerable. Therefore,
it is essential to connect said
outlet to the drainage network. The present appliance does not have a collection
tray and automatic evaporation of said liquid.
USE, REGULATION AND CONTROL
The appliance is turned on by pressing the start-up switch located on the front
part of the controls. Said switch will light up and the start-up of the motor will be heard
after 2 minutes. This delay is the protection programmed by default, which should not
be modified by the user.
The regulation is carried out by means of a digital electronic thermostat,
allowing adjusting the different temperatures of the appliance depending on the existing
environmental conditions.
The use instructions of the digital thermostat are attached to this manual.
However, WE DO NOT RECOMMEND THE ADJUSTMENT OF THE
THERMOSTAT BY UNQUALIFIED PERSONNEL. Please, CONTACT YOUR
DISTRIBUTOR IN ORDER TO HAVE THE NECESSARY ADJUSTMENTS
CARRIED OUT.
This appliance carries out defrosting to get rid of the ice generated by the
evaporator. It may be necessary to sometimes slightly vary the default programme of
said defrosting process due to climate reasons and/or conditions in the premises.
If there is an excessive accumulation of ice on the evaporator or in the event of a
lack of cooling performance of the appliance, please contact your distributor for a
diagnosis to be made and assess if an adjustment in the defrosting programme is
necessary.
RECOMMENDED WORKING TEMPERATURES
CRVGI-X11 (all models)
Between 0ºC and 4ºC