Edelbrock E-Force 1580, Руководство по установке

Страница: 8 / 33

©2011 Edelbrock LLC
Part #1580 & 1585
Brochure #63-1580
Rev. 1/11 - AJ/mc
Edelbrock 4.6L Ford Supercharger System
for 2005 and later Mustang GTs
Installation Instructions
Page 8
7. Use an 8mm socket with a 12” extension bar to
remove the three bolts holding the battery tray in place,
then use a panel puller to detach the wiring harness clip.
Remove and set aside the tray.
Bolts Wiring Harness Clip
8. Use a flat blade screwdriver to pry up the head of the
six push-pins that retain the radiator shroud, then use a
panel puller to fully remove the push-pins. Lift the shroud
off the car and set it and the push-pins aside.
III. Removing Engine Components
9. Detach the charge motion control valve (CMCV)
electrical connector at the rear of the manifold. Seperate
the wiring retainers from the intake manifold stud and the
CMCV bracket, then move the wiring harness to the side.
10. Detach the throttle position sensor (TPS) and
electronic throttle control (ETC) connectors from the
throttle body.
ETC TPS