Versatrax 50™ In-Line
Document: UMBU014988.docm
Revision: A04
Created by: KJW
Date: 20 Nov 2019
IPN: 3080215-A04
Source Location: C:\ePDM\ISLEng\products\bu-vt50vehicles\manuals\UMBU014988.docm
Page 11 of 25
User Ma
nual
4. For two or three-track configurations, link to the next track using a flexible push link. The push
link will install between tracks in the same way the tow cable was attached above. Connect the
integrated interconnect cable to the next track.
5. Link to the camera using another flexible push link. Connect the integrated interconnect cable
from the front track to the camera.
6. Install the appropriate traction wheels and camera skids as discussed in the sections below.
Traction Wheel Setup
– All Sizes
Because the Picotrac is very light, it always requires a pressure wheel to gain traction. The integrated
traction arm is preconfigured for use in 2
– 3in [50mm – 78mm] pipe. For larger pipes, the integrated
traction arm remains in place but is augmented by an extension wheel which bolts into a slot in the traction
arm.
For 3
– 3½in [78mm – 90mm] pipe use the 3-inch traction arm. (IPN 3089224)
For 3½
– 4in [90mm – 100mm] pipe use the 4-inch traction arm. (IPN 3089227)
