Versatrax 50™ In-Line
Document: UMBU014988.docm
Revision: A04
Created by: KJW
Date: 20 Nov 2019
IPN: 3080215-A04
Source Location: C:\ePDM\ISLEng\products\bu-vt50vehicles\manuals\UMBU014988.docm
Page 8 of 25
User Ma
nual
WARNING: Trip Hazard
- Never stand on the tether. A snap load to the tether
may pull it out from underneath you and cause you to fall. Standing on the tether
may also damage its internal conductors, cause unnecessary wear, and decrease
its life.
WARNING: Mechanical Pinch Hazard
– Rotating or moving components can draw
fingers into a pinch position. Do not handle the vehicle while mobile parts are
running, turn off power or disconnect the tether while reconfiguring or maintaining
the vehicle.
WARNING:
High Voltage
36-70 VDC.
Disconnect the power source before
servicing the product; otherwise, damage may result.
•
Eddyfi Technologies’ Inuktun equipment is used in many varied environments from hot/dry to
confined spaces to deep underwater. Such diverse environment risks must be addressed by the
operators who are trained to work in such surroundings. As such, the operator is responsible to
determine safe site setup and appropriate work procedures for deployment and operation of the
equipment.
•
Do not operate the camera with a damaged connector or cable. Inspect connectors and cables
regularly for damage.
•
Lay the vehicle on its side if you are powering it up on the workbench.
•
All personnel operating or maintaining this equipment must be trained and competent.
•
Call the Eddyfi Technologies service department for assistance or service if needed.
