SE-3&SE-300 Series Electrocardiograph User Manual Settings
- 51 -
Item
Description
Measure
Choose from:
On
or
Off
,
the default value is
On
When it is set to
On
, the Measure information will be printed in the ECG
report.
Analysis
Choose from:
On
or
Off
,
the default value is
On
When it is set to
On
, the Analysis information will be printed in the ECG
report.
Template
Choose from:
2×6+1R, 3×4
or
Off
,
the default value is
Off
When it is set to
Off
, the template will not be printed in the ECG report
Position Marker
Choose from:
On
or
Off
,
the default value is
Off
When it is set to
Off
, the template printed in the ECG report will not have
position marker.
Minnesota Code
Choose from:
On
or
Off
,
the default value is
On
When it is set to
On
, the Minnesota Code will be printed in the ECG
report.
Device No.
Choose from:
On
or
Off
,
the default value is
On
When it is set to
On
, the Device No. will be printed in the ECG report.
Record Device
Choose from:
Thermal
,
HP 2010/1050/2000
,
HP 2015/2035/1525, or HP
1020, or HP 1505
,
the default value is
On
You should connect the corresponding USB printer
HP 2010/1050/2000
and
HP 2015/2035
to the electrocardiograph.
WARNING
If the printer used is not the type listed above, additional safety
measures (such as applying an isolation transformer to supply the
medical system) should be taken when the safety of the medical
system has not been evaluated. If in doubt, consult our technical
service department or your local distributor.
CAUTION
It is forbidden to connect or disconnect a U disk or a USB printer
during the transmission course.
