ECS Photon Extreme KN3 SLI2, Руководство пользователя

Страница: 37 / 106

3-8
3.3-3 Advanced Chipset Features
These items define critical timing parameters of the mainboard. You
should leave the items on this page at their default values unless you are
very familiar with the technical specifications of your system hardware.
If you change the values incorrectly, this may cause fatal errors or
instability into your system.
CPU Frequency [200.0]
K8<->NB HT Speed [Auto]
K8<->NB HT Width [Auto]
NB--> SB HT Speed [Auto]
NB<-->SB HT Width [Auto]
DRAM Configuration [Press Enter]
CPU Spread Spectrum [Center]
PCIE Spread Spectrum [Disabled]
SATA Spread Spectrum [Disabled]
HT Spread Spectrum [Disabled]
SSE/SSE2 Instructions [Enabled]
CPU Thermal-throttling [50.0x]
System BIOS Cacheable [Disabled]
NVIDIA GPU Ex [Disabled]
Item Help
Menu Level
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Advanced Chipset Features
CPU Frequency (200.0)
This item enables users to manually over-clock the CPU frequency, ranging from
200.0 to 300.0.
DRAM Configuration (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Timing Mode [Auto]
Item Help
Menu Level
Phoenix-Award WorkstationBIOS CMOS Setup Utility
DRAM Configuration
x
Memclock index value or LimiDDR2 400
SPD Checksum Restart [Ignore]
DQS Training Control [Perform DQS]
CKE base power down mode [Enabled]
CKE based powerdown
[Per Channel]
Memclock tri-stating [Disabled]
Memory Hole Remapping [Enabled]
Auto Optimize Bottom IO [Enabled]
Bottom of [31:24] IO space [CO]
Bottom of UMA DRAM [31:24][FC]
DDRII Timing Item
[Disabled]
TwTr Command Delay 3 bus clocks
Trfc0 for DIMM0 75ns
Trfc1 for DIMM1 75ns
Trfc2 for DIMM2 75ns
Trfc3 for DIMM3 75ns
(Twr) Write Recovery Time 6 bus clocks
(Trtp) Precharge Time
2 Clocks
(Trc) Row Cycle Time 26 bus clocks
x
x
x
x
x
F5:Previous Values F6:Performance Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
x
x
x
x
Auto,no user limit
MaxMemClk, limit by Memory
Clock value
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
K8 NB HT Speed/Width/NB SB HT Speed/Width (Auto)
This item enables users to manually set up the HyperTransport speed and width.