ECS Photon Extreme KN3 SLI2, Руководство пользователя, Страница: 27 / 106

2-6
4-pin ATX power connector
2.9 Powering up
Turn on the power to the monitor and the computer. If necessary,
format your hard disk drive and install an operating system.
Users please note that when installing 4-pin
power cable, the latches of power cable
and the ATX12V match perfectly.
24-pin power cable
With ATX v2.x power supply, users please
note that when installing 24-pin power
cable, the latch of power cable connector
clings to the right side of the ATX connec-
tor latch.
2.8 Connecting the Power supply cable
Connecting 20/24-pin power cable
The ATX power connector is keyed for proper insertion. There are two
connectors for 4-pin and 24-pin ATX power cable. The plastic clip on
the power connector should lock over the plastic tab on the
motherboard power connector.
With ATX v1.x power supply, users please
note that when installing 20-pin power
cable, the latche of power cable clings to
the left side of the ATX connector latch.
20-pin power cable
Users please note that the 20-pin and 24-pin power cables can
both be connected to the ATX connector. With the 20-pin power
cable, just align the 20-pin power cable with the pin 1 of the ATX
connector. However, using 20-pin power cable may cause the
system to become unbootable or unstable because of insufficient
electricity. A minimum power of 300 W is recommended for a
fully-configured system.