6-8
f
4.
Key in the RAID volume capacity. Use the up/down arrow to
choose the block size. The default value indicates the maximum
allowed capacity.
5.
When done, press <Enter> to confirm the creation of the RAID
set. A dialogue box appears to confirm the action. Press <Y> to
confirm; otherwise, press <N>.
Pressing <Y> deletes all the data in the HDDs.
6.
The following screen appears, displaying the relevant information
about the RAID set you created.
3.
When the Disks item is highlighted, use the up/down arrow key to
highlight an HDD that you want to belong to the RAID set, then
press the space bar to confirm selection. Repeat the process until
the HDDs are selected.
A selected HDD shows a sign before it.
Содержание Photon Extreme KN3 SLI2
