ECS Photon Extreme KN3 SLI2, Руководство пользователя

Страница: 76 / 106

6-10
f
To reset disks to non-RAID:
1. In the main JMB363 RAID BIOS menu, highlight Revert HDD to
non-RAID using the up/down arrow key then press <Enter>.
2. Use the space bar to select the HDD that you want to reset to non-
RAID.
A selected HDD shows a sign before it.
3. A dialogue box appears to confirm the action. Press <Y> to con-
firm; otherwise, press <N>.
6.2-6 Solving a Mirror confilict
A Mirror conflict occurs when both disks in a RAID 1 (Mirror) configuration
are unplugged from the system in turn, then plugged in again. Since both
disks contain exactly the same data, the system will be unable to determine
which of the two is the source drive. This option allows you to set the source
drive and rebuild the Mirror drive according to the contents of the source
drive.
To solve a Mirror conflict:
1. In the main JMB363 RAID BIOS menu, highlight Solve Mirror
Conflict using the up/down arrow key then press <Enter>.
If you still want to use this broken RAID HDD as part of the
RAID set configured through the JMB363, you may do so by
resetting the disk to non-RAID. You will, however, lose all data
and previous RAID configurations.
Pressing <Y> deletes all the data in the HDDs.