ECS Photon Extreme KN3 SLI2, Руководство пользователя, Страница: 48 / 106

3-19
DIMM Voltage Control (1.80V)
This item allows users to adjust DIMM voltage. The higher you set the voltage,
the more likely you will cause damage to your CPU or DIMM.
Adjust Extra NB Vcore (1.200V)
This item allows users to manually adjust the extra NB Vcore voltage. Users are
recommended to keep it at its default value.
Adjust Extra NB<-->CPU HT Vcore(1.200V)
When set Normal, it will not adjust extra NB<-->CPU HT Vcore.
Adjust Extra SB Vcore (1.500V)
This item allows users to manually adjust the extra SB Vcore voltage. Users are
recommended to keep it at its default value.
3.3-9 Load Performance Defaults
If you select this item and press Enter a dialog box will appear. If you select
[OK], and then Enter, the Setup Utility loads a set of performance default
values. These default settings are quite demanding and your system might
not function properly if you are using slower CPU, memory, or other low-
performance components.
Warning: To load Performance settings may make your system become unstable or
unbootable. When loading the Performance Defaults fails, users can choose
“either” step to return the motherboard to its defaults BIOS:
1. Power on the system and press “Insert” key. The system will bypass the previous
BIOS setting and automatically reload the default BIOS. (This
procedure is BIOS setup only!)
2. Apply to the jumper setting reference onboard and proceed with the “Clear
CMOS” to recover the default BIOS setting. Please refer to Chapter 2, page 9, to
complete the clear CMOS action. (This procedure requires opening the chasis!)